UiPath Documentation
test-cloud
latest
false

Test Cloud admin guide

Legacy - Configuring the firewall for Test Cloud

For general network configuration and firewall information, refer to Configuring the firewall

Warning:

Deprecation notice — action required

The outbound IP ranges listed on this page are being deprecated and will be replaced by unified outbound IP ranges. For specific dates, see the Timeline in the Deprecation notice section below.

Before the transition end date: Keep these IP ranges in your firewall configuration and add the new unified IP ranges. Both sets must be allowlisted simultaneously during the transition window.

After the transition end date: Continue allowlisting both the IP ranges on this page and the unified IP ranges until a subsequent release note confirms the legacy IP ranges can be safely removed.

Deprecation notice​

The outbound IP ranges on this page are being replaced by a unified set of outbound IP ranges. This section summarizes the full timeline, scope, and required actions.

What is changing​

UiPath is consolidating all service-specific outbound IP ranges into a single set of unified outbound IP ranges, organized by global customer region rather than by individual service. The new unified ranges apply uniformly to all services within each region.

Affected services: Test Cloud Portal, AI Trust Layer, Notification Service, Orchestrator, Test Manager, Apps, Automation Ops, and Integration Service.

Not affected (no changes to their IP ranges): Insights, IXP, and Automation Cloud Robots - Serverless.

Timeline​

MilestoneDate
Unified IP ranges published; deprecation announced; dual-allowlist window beginsJune 16, 2026
Dual-allowlist window ends; legacy IP ranges begin phased-outSeptember 16, 2026
This page no longer updatedSeptember 16, 2026

What you need to do​

  1. Add the unified IP ranges now. Visit the Configuring the firewall for Test Cloud page and add all ranges for your region.
  2. Before the transition end date (see Timeline): Keep the IP ranges on this page and the new unified IP ranges both allowlisted simultaneously.
  3. After the transition end date: Continue allowlisting both sets of IP ranges until a subsequent release note confirms the legacy IP ranges can be safely removed.

Test Cloud Portal​

Allow these domains used by Test Cloud Portal:

Important:

If you use Azure buckets, they must not be located in the tenant's region or in the failover region.

Domains​

ScenarioDomains
Sign in with basic authenticationhttps://account.uipath.com
https://cloud.uipath.com
https://platform-cdn.uipath.com
Sign in with Microsofthttps://aadcdn.msftauth.net
https://account.uipath.com
https://cloud.uipath.com
https://login.live.com
https://login.microsoftonline.com
https://platform-cdn.uipath.com
Sign in with Googlehttps://account.uipath.com
https://cloud.uipath.com
https://accounts.google.com
https://google.com
https://lh3.googleusercontent.com
https://platform-cdn.uipath.com
https://www.gstatic.com
Sign in with LinkedInhttps://account.uipath.com
https://cloud.uipath.com
https://lnkd.demdex.net
https://platform-cdn.uipath.com
https://platform.linkedin.com
https://static-exp1.licdn.com
https://www.linkedin.com
Sign in with Azure Active Directory (Azure AD)https://aadcdn.msftauth.net
https://cloud.uipath.com
https://login.microsoftonline.com
Sign in with UiPath Assistant (basic email)*-signalr.service.signalr.net For events related to signing in with basic authentication: https://account.uipath.com
https://cloud.uipath.com
https://platform-cdn.uipath.com
Sign in with UiPath Studio (basic email)https://api.nuget.org
*-signalr.service.signalr.net
https://gallery.uipath.com
https://pkgs.dev.azure.com For events related to signing in with basic authentication: https://account.uipath.com
https://cloud.uipath.com
https://platform-cdn.uipath.com
Sign in for the first time / Reset passworduipath.eu.auth0.com
account.uipath.com
Static assets: Fonts, Styling and CDN hosted scriptsFonts: https://use.typekit.net
https://fonts.gstatic.com
https://platform-cdn.uipath.com
Images: https://s.gravatar.com
https://secure.gravatar.com
https://*.wp.com
https://*.googleusercontent.com
https://i.ytimg.com
https://platform-cdn.uipath.com
CSS: https://fonts.googleapis.com/css
https://use.typekit.net
https://p.typekit.net
https://platform-cdn.uipath.com
Scripts: https://primer.typekit.net
https://use.typekit.net
https://platform-cdn.uipath.com
Sign in via Auth0 (for EU)uipath.eu.auth0.com
Update servicesctldl.windowsupdate.com To configure network connections, use Microsoft documentation.
Download Autopilot for Everyone from the AI Trust Layer admin sectionhttps://autopilot-prd.azureedge.net

Outbound IP ranges to enable a firewall for the customer-managed key​

Required only when the Test Cloud Portal must connect to your Azure Key Vault for Customer-Managed Key (CMK) scenarios. These outbound IP ranges represent the source IP ranges that your firewall must allow. For details, refer to the Enabling the firewall for the customer-managed key documentation.

Note:

The planned migration of Test Cloud Portal CMK outbound IP ranges to new ranges — previously tracked as a separate transition (see the April 27, 2026 outbound IP ranges completion announcement) — has been paused. This migration is now absorbed into the broader unified outbound IP ranges transition. The IP ranges listed below remain active until the transition end date shown in the Timeline.

Allow these outbound IP ranges through your firewall:

RegionsOutbound IP ranges
Australia
20.213.69.140/30
20.92.42.116/30
20.213.69.140/30
20.92.42.116/30
Canada
20.220.159.8/30
20.104.134.160/30
20.220.159.8/30
20.104.134.160/30
Community
20.166.153.132/30
20.23.210.168/30
20.166.153.132/30
20.23.210.168/30
European Union
20.166.153.132/30
20.23.210.168/30
20.166.153.132/30
20.23.210.168/30
European Union (delayed)
20.166.153.132/30
20.23.210.168/30
20.166.153.132/30
20.23.210.168/30
India
20.219.182.96/30
52.140.57.140/30
20.219.182.96/30
52.140.57.140/30
Japan
20.78.114.120/30
104.215.9.124/30
20.78.114.120/30
104.215.9.124/30
Singapore
20.198.150.140/30
52.140.57.140/30
20.198.150.140/30
52.140.57.140/30
United Kingdom
20.90.169.148/30
51.142.146.56/30
20.90.169.148/30
51.142.146.56/30
United States
20.232.224.12/30
20.66.65.144/30
20.232.224.12/30
20.66.65.144/30
United States (delayed)
20.232.224.12/30
20.66.65.144/30
20.232.224.12/30
20.66.65.144/30

Outbound IPs for notifications​

You can configure Notification service systems to use SMTP servers from your own on-premises or cloud networks. If you want to provide additional security to your Notification service system, you can protect it with a firewall, and only allow Notification Service's outbound static IP ranges through it.

20.213.69.140/30
20.92.42.116/30
20.220.159.8/30
20.104.134.160/30
20.239.121.152/30
20.232.224.12/30
20.78.114.120/30
104.215.9.124/30
20.166.153.132/30
20.198.150.140/30
20.23.210.168/30
20.66.65.144/30
149.72.70.144
20.213.69.140/30
20.92.42.116/30
20.220.159.8/30
20.104.134.160/30
20.239.121.152/30
20.232.224.12/30
20.78.114.120/30
104.215.9.124/30
20.166.153.132/30
20.198.150.140/30
20.23.210.168/30
20.66.65.144/30
149.72.70.144

Relay​

Allow these domains used by the Relay client to establish connectivity to Test Cloud:

PurposeDomainsProtocolPort
Authentication and relay registrationcloud.uipath.comHTTPS443
Relay server - US regionus-relay.uipath.comTCP (TLS passthrough required)443
Relay server - EU regioneu-relay.uipath.comTCP (TLS passthrough required)443
Relay server - Canada regionca-relay.uipath.comTCP (TLS passthrough required)443
Relay server - Switzerland regionch-relay.uipath.comTCP (TLS passthrough required)443
Relay server - Australia regionau-relay.uipath.comTCP (TLS passthrough required)443
Relay server - Singapore regionsg-relay.uipath.comTCP (TLS passthrough required)443
Relay server - Japan regionjp-relay.uipath.comTCP (TLS passthrough required)443
Relay server - South Korea regionkr-relay.uipath.comTCP (TLS passthrough required)443
Relay server - UAE regionae-relay.uipath.comTCP (TLS passthrough required)443
Relay server - UK regionuk-relay.uipath.comTCP (TLS passthrough required)443

Action Center​

Domains​

The following table lists the domains used by Action Center that we recommend allowing, based on the functionality you plan to use:

ScenarioDomains to Allow
Authenticationhttps://cloud.uipath.com
https://account.uipath.com/
https://lh3.googleusercontent.com/
Navigate to Action Center pagehttps://cloud.uipath.com
https://uipath-acc-prod.azureedge.net/
https://www.youtube.com/
https://platform-cdn.uipath.com/
https://fonts.gstatic.com/
*.googleapis.com
View/Assign/Un-assign/Delete an Actionhttps://cloud.uipath.com
https://api.smartling.com/
https://uipath-acc-prod.azureedge.net/
*.cloudfront.net
https://platform-cdn.uipath.com/
https://fonts.gstatic.com/
*.googleapis.com
Storage bucket (File upload/download)*.blob.core.windows.net

AI Center​

Domains​

The following table lists the domains used by AI Center:

Module or Scenario

Domains to Allow

AI Center

Identity Server

https://cloud.uipath.com

PkgManager

https://cloud.uipath.com

Deployer

https://cloud.uipath.com

Helper

https://cloud.uipath.com

Trainer

https://cloud.uipath.com

AppManager

https://cloud.uipath.com

Upload files

Australia: https://aifproddataauetraining.blob.core.windows.net Canada: https://aifproddatacactraining.blob.core.windows.net Europe: https://aifproddatawetraining.blob.core.windows.net Japan: https://aifproddatajaetraining.blob.core.windows.net Singapore: https://aifproddataseatraining.blob.core.windows.net USA: https://aifproddataeustraining.blob.core.windows.net GXP: https://aifgxpdatawetraining.blob.core.windows.net

Third-party Services

AppInsights

https://bam.eu01.nr-data.net

https://eastus-6.in.applicationinsights.azure.com/

Static Assets

https://aifprodassets.azureedge.net

https://i2.wp.com/cdn.auth0.com

https://api.smartling.com

https://s.gravatar.com

https://js-agent.newrelic.com

https://fonts.gstatic.com

https://use.typekit.net

https://fonts.googleapis.com

https://d2c7xlmseob604.cloudfront.net

https://du-prod-cdn.azureedge.net/

https://aifprodassets.azureedge.net/

Navigate to AI Center

Permissions

https://cloud.uipath.com

OpenId configuration

https://cloud.uipath.com

https://dc.services.visualstudio.com

https://d2c7xlmseob604.cloudfront.net

https://use.typekit.net

https://fonts.googleapis.com

https://aifstgassets.azureedge.net

https://p.typekit.net

https://fonts.gstatic.com

https://api.smartling.com

https://js-agent.newrelic.com

https://i2.wp.com/cdn.auth0.com

https://bam.eu01.nr-data.net

https://du-prod-du-eus-signalr.service.signalr.net/

wss://du-prod-du-eus-signalr.service.signalr.net/

AI Computer Vision​

The following table lists the endpoint values and server locations used by AI Computer Vision:

The following table lists the endpoint values and server locations used by AI Computer Vision:

Endpoint ValueServer Location
https://cv.uipath.comNearest geolocation based on the request IP
https://cv-eu.uipath.comWest Europe
https://cv-us.uipath.comUS
https://cv-delayed.uipath.comDelayed enterprise ring deployment, located in the United States

AI Trust Layer – Bring your own LLM​

Outbound IP ranges​

Allow the following outbound IP ranges to establish communication between the Bring your own LLM functionality of AI Trust Layer, and your own system. The Bring your own LLM functionality depends on Integration Service connectors for communication. To use this capability and create connections successfully, you must also add the Integration Service outbound IP ranges to your allowlist.

Table 1. Outbound IP ranges for Bring your own LLM

RegionOutbound IP ranges
Australia
Canada
Europe (European Union)
European Union delayed
Community (Europe)
India
Japan
Singapore
United Kingdom
United States
United States delayed

Apps​

Domains​

The following table lists the domains used by Apps that you need to allow:

ScenarioDomains to Allow
Navigate to Appshttps://cloud.uipath.com
https://fonts.googleapis.com
https://cdnjs.cloudflare.com
https://uipath-apps-prd.azureedge.net
https://fonts.gstatic.com
https://dc.services.visualstudio.com
https://<orgname>.uipath.host
Create apps, or create apps via import, or add or delete processhttps://cloud.uipath.com
https://uipath-apps-prd.azureedge.net
Export, clone, share, delete, edit, or publish an apphttps://cloud.uipath.com
Run or preview an apphttps://cloud.uipath.com
https://fonts.googleapis.com
https://cdnjs.cloudflare.com
https://uipath-apps-prd.azureedge.net
https://fonts.gstatic.com
https://dc.services.visualstudio.com
https://<orgname>.uipath.host
https://api.uipath.com
Select on Processes or Create rulehttps://uipath-apps-prd.azureedge.net
Bind processhttps://uipath-apps-prd.azureedge.net
https://cloud.uipath.com
https://dc.services.visualstudio.com
General or Permissionhttps://api.smartling.com
Create or delete a page, or create or delete Historyhttps://cloud.uipath.com
https://api.smartling.com
Connect to Apps*.trafficmanager.net
wss://*.uipath.systems
wss://cloud.uipath.com

Outbound IP ranges​

The Apps service uses the outgoing IP ranges listed below for all external communications. The following table shows the available outbound IP ranges for each region.

RegionOutbound IP ranges
Europe
Europe (Secondary)
Europe - Community
Europe - Community (Secondary)
US
US (Secondary)
Canada
Canada (Secondary)
Singapore
Japan
Japan (Secondary)
Australia
Australia (Secondary)
India
India (Secondary)
UK
UK (Secondary)
GXP US (Secondary)
GXP US

Traffic from this IPs needs to be allowed through the Organization DMZ firewall and any other intermediate firewalls including the firewall on the computer/s in which Orchestrator application is hosted.

  • The associated port on which Orchestrator application is hosted needs to be exposed through the DMZ on all relevant firewalls (see the previous point).
  • An Orchestrator user who has read and execute access to relevant processes whose credential will be used from UiPath Apps to talk to Orchestrator.
  • If using local robot process execution through RobotJS, please ensure RobotJS is properly configured using instructions provided at RobotJS.
Best practices​
  • Ensure that the On-Premise hosted Orchestrator is only accessible through a secure HTTPS channel.
  • Create a low privilege user in Orchestrator that only has read and execute access to just the desired processes/folders and use that for the integration.
CORS policy requirements for Storage Buckets​

When using storage buckets from an on-premises or hybrid Orchestrator, add https://cloud.uipath.com to the acceptedRootURLs list in the UiPath.Orchestrator.dll.config file.

Note:
  • If your Orchestrator instance is hosted in Test Cloud, this configuration is already in place.
  • For external buckets, configure the allowed origins as described in the CORS and CSP configuration guide."

UiPath Apps uploads and downloads files using the SAS URL generated by Orchestrator when interacting with storage buckets hosted in an on-premises environment. End users must have the appropriate permissions granted through that SAS URL to perform both upload and download operations.

Important:

All access control is defined and enforced by the underlying storage account configuration. UiPath does not manage or override these permissions.

If users encounter errors when uploading or downloading files through UiPath Apps, the storage account's SAS policies or access restrictions should be reviewed and updated by the storage owner to ensure the required level of access.

Content types to add to the allow list​

UiPath Apps utilizes the content types application/octet-stream and application/zip for downloading specific DLL files required to run and preview created applications. It is important to ensure the following content types are allowed within your network settings to avoid interruptions in app functionality:

application/zip
application/octet-stream
application/json
text/html
application/javascript
text/css
font/woff2
image/vnd.microsoft.icon
image/svg+xml
image/bmp
image/jpeg
image/png
image/gif
application/zip
application/octet-stream
application/json
text/html
application/javascript
text/css
font/woff2
image/vnd.microsoft.icon
image/svg+xml
image/bmp
image/jpeg
image/png
image/gif
Key Considerations​

Apps are developed using Blazor technology, which processes assemblies directly in the browser. If restrictions for the required content types cannot be lifted within your network, Apps may not function as expected, as there are currently no alternative solutions to bypass these limitations.

Apps in Studio Web as an alternative​

Apps in Studio Web are designed with a different architecture, that does not require downloading DLL files. If network restrictions prevent the use of Standalone Apps, consider adopting Apps in Studio Web (RPA Apps). This architecture eliminates dependency on restricted content types, ensuring smoother compatibility in restricted network environments.

Automation Cloud Robots - Serverless​

Outbound IP ranges​

Outbound IP ranges for Automation Cloud Robots - Serverless enable you to route outbound network traffic through a dedicated, static IP address ranges managed by UiPath. This allows you to whitelist or securely integrate with external systems that restrict incoming connections to known IPs.

Configuration​

You can enable static outbound IP ranges while creating the Serverless template and going to the Network Configuration page.

Availability​

The outbound IP ranges can sometimes change as a result of infrastructure deployments. To help keep you on top of any changes, we have compiled a list of up-to-date static outbound IP ranges, in the following tables.

Community Users​
RegionCIDROutbound IP ranges
Europe
20.191.43.0/30
20.191.42.240/30
20.191.43.0/30
20.191.42.240/30

20.191.43.0
20.191.43.1
20.191.43.2
20.191.43.3
20.191.42.240
20.191.42.241
20.191.42.242
20.191.42.243
20.191.43.0
20.191.43.1
20.191.43.2
20.191.43.3
20.191.42.240
20.191.42.241
20.191.42.242
20.191.42.243
Enterprise Users​
RegionCIDROutbound IP ranges
Australia
20.53.170.116/30
20.53.170.208/30
20.53.170.116/30
20.53.170.208/30

20.53.170.116
20.53.170.117
20.53.170.118
20.53.170.119
20.53.170.208
20.53.170.209
20.53.170.210
20.53.170.211
20.53.170.116
20.53.170.117
20.53.170.118
20.53.170.119
20.53.170.208
20.53.170.209
20.53.170.210
20.53.170.211
United States
20.102.5.168/30
20.102.0.76/30
172.202.61.224/30
*
20.15.227.248/30
*
20.102.5.168/30
20.102.0.76/30
172.202.61.224/30
*
20.15.227.248/30
*

20.102.5.168
20.102.5.169
20.102.5.170
20.102.5.171
20.102.0.76
20.102.0.77
20.102.0.78
20.102.0.79
172.202.61.224
*
172.202.61.225
*
172.202.61.226
*
172.202.61.227
*
20.15.227.248
*
20.15.227.249
*
20.15.227.250
*
20.15.227.251
*
20.102.5.168
20.102.5.169
20.102.5.170
20.102.5.171
20.102.0.76
20.102.0.77
20.102.0.78
20.102.0.79
172.202.61.224
*
172.202.61.225
*
172.202.61.226
*
172.202.61.227
*
20.15.227.248
*
20.15.227.249
*
20.15.227.250
*
20.15.227.251
*
Japan
20.44.188.168/30
20.44.185.192/30
20.44.188.168/30
20.44.185.192/30

20.44.188.168
20.44.188.169
20.44.188.170
20.44.188.171
20.44.185.192
20.44.185.193
20.44.185.194
20.44.185.195
20.44.188.168
20.44.188.169
20.44.188.170
20.44.188.171
20.44.185.192
20.44.185.193
20.44.185.194
20.44.185.195
Europe (European Union)
20.191.46.104/30
20.191.43.60/30
20.191.46.104/30
20.191.43.60/30

20.191.46.104
20.191.46.105
20.191.46.106
20.191.46.107
20.191.43.60
20.191.43.61
20.191.43.62
20.191.43.63
20.191.46.104
20.191.46.105
20.191.46.106
20.191.46.107
20.191.43.60
20.191.43.61
20.191.43.62
20.191.43.63
  • Added on February 18th, 2026.

Automation Hub​

Domains​

The following table lists the domains used by Automation Hub:

The following table lists the domains used by Automation Hub:

ScenarioDomains to Allow
Navigate to the Automation Hub pagehttps://cloud.uipath.com
http://*.userpilot.io
https://dc.services.visualstudio.com
https://ah-prod-ts-blue-eu.uipath.com
https://ah-prod-ts-blue-us.uipath.com
https://ah-prod-ts-blue-ja.uipath.com
https://ah-prod-ts-blue-au.uipath.com
https://ah-prod-ts-blue-ca.uipath.com
https://ah-prod-ts-blue-sea.uipath.com
https://ah-prod-ts-blue-uk.uipath.com
https://ah-prod-ts-blue-in.uipath.com
https://ah-gxp-ts-blue-us.uipath.com
Use OpenAPI for Automation Hubhttps://automation-hub.uipath.com
http://ah-gxp-openapi-us.uipath.com

Automation Ops​

Domains​

The following table lists the domains used by Automation Ops:

ScenarioDomains to Allow
Navigate to the Automation Ops pagehttps://stdadmstgcdn.azureedge.net
https://app.vssps.visualstudio.com
https://stdadmstgcdn.blob.core.windows.net
https://nexus.ensighten.com
https://cloud.uipath.com
https://platform-cdn.uipath.com
https://use.typekit.net
https://p.typekit.net
https://content.usage.uipath.com
https://dc.services.visualstudio.com
https://data.usage.uipath.com
*-signalr.service.signalr.net
https://s.gravatar.com
https://i2.wp.com
https://github.com
https://github.githubassets.com
https://avatars.githubusercontent.com
https://collector.github.com
https://api.github.com

Outbound IP ranges​

The table below lists all outbound IP ranges currently used by Automation Ops.

RegionOutbound IP ranges
Australia
Japan
United States
United States GXP
Europe
Europe GXP
Canada
Singapore
India
UK

IXP​

Domains​

The following table lists the domains that IXP uses:

ScenarioDomains to Allow
Admin Portal / Identity Serverhttps://cloud.uipath.com
Static assetshttps://fonts.googleapis.com
https://fonts.gstatic.com
Azure SignalR*.service.signalr.net
Telemetryhttps://*.in.applicationinsights.azure.com
https://dc.services.visualstudio.com
Pendo (clickable in-app guides)https://*.pendo.io
Performance monitoringhttps://o486811.ingest.sentry.io

Inbound IP ranges​

Note:

This section applies only to legacy Re:infer customers.

Add the following inbound IP ranges to your allow list to use IXP and create connections:

RegionInbound IP ranges
Europe34.91.100.206
US
34.69.242.10
20.62.244.78
34.69.242.10
20.62.244.78
Japan34.84.144.176
Australia35.189.46.91
Canada34.152.10.176
Singapore35.240.179.214

Outbound IP ranges​

Allow the following outbound IP ranges for IXP to sync emails from your Exchange. For details, check the Overview Exchange integration.

RegionOutbound IP ranges
Europe35.204.220.118
US34.71.173.219
Japan34.84.107.92
Australia34.87.223.173
Canada34.152.42.160
Singapore34.143.128.81

Data Fabric​

Domains​

The following table lists the domains used by Data Fabric:

ScenarioDomains to Allow
All Data Fabric operationshttps://cloud.uipath.com
Fetching static frontend content*.cloudapp.azure.com
Sending notifications to notification hub*.service.signalr.net
Collection of telemetry*.visualstudio.com

Document Understanding​

Domains​

The following table lists the domains used by Document Understanding:

Module or ScenarioDomains to Allow
Navigate to Document Understandinghttps://*.uipath.com
Azurehttps://*.azure.com
Networkhttps://*.azureedge.net
https://*.azurefd.net
Telemetryhttps://*.visualstudio.com
Azure SignalRhttps://*.service.signalr.net
Storagehttps://*.trafficmanager.net
https://*.blob.core.windows.net
Pendohttps://*.pendo.io
Public endpointsCheck the Public endpoints page for the full list of public endpoints URLs.

Insights​

Domains​

The following table lists the domains used by Insights:

ScenarioDomains to Allow
Navigate to the Insights pagehttps://cloud.uipath.com
https://*.lookercdn.com
https://uipath-insights-statics.azureedge.net/
https://*.looker.uipath.com/

Outbound IP ranges​

Outbound IP ranges allow you to add a list of IPs for Log Export and Real Time Data Export features to the allowlist and not open your network to all external IPs. If the Blob storage regions correspond to the respective Insights service region, you cannot use public IPs.

Table 2. Insights Outbound static IP ranges
Insights service region Blob storage region Functionality Outbound static IP ranges
Europe
  • North Europe
  • West Europe
Log Export 
4.209.242.155
52.158.117.70
48.209.163.160
132.220.192.40
4.209.242.155
52.158.117.70
48.209.163.160
132.220.192.40
Real Time Data Export 
48.209.165.211
4.209.26.11
48.209.165.211
4.209.26.11
Looker SFTP notifications 
34.159.94.48
34.159.97.39
34.89.186.9
34.159.94.48
34.159.97.39
34.89.186.9
United States of America
  • North Europe
  • West Europe
  • East US
  • West US
Log Export 
4.209.242.155
134.33.227.198
134.33.128.26
4.209.242.155
134.33.227.198
134.33.128.26
Real Time Data Export 
4.156.106.136
134.33.152.158
4.156.106.136
134.33.152.158
Looker SFTP notifications 
34.145.223.13
34.150.213.234
35.186.171.220
34.145.223.13
34.150.213.234
35.186.171.220
Australia
  • North Europe
  • Australia East
  • West Europe
  • Australia Southeast
Log Export 
4.209.242.155
4.254.65.248
4.209.242.155
4.254.65.248
Real Time Data Export 
4.237.200.13
4.237.193.83
4.237.200.13
4.237.193.83
Looker SFTP notifications 
34.151.78.48
34.116.85.140
34.87.195.36
35.189.54.47
34.151.78.48
34.116.85.140
34.87.195.36
35.189.54.47
Japan
  • North Europe
  • Japan East
  • West Europe
  • Japan West
Log Export 
4.209.242.155
135.149.20.42
4.209.242.155
135.149.20.42
Real Time Data Export 
74.176.138.15
135.149.17.81
74.176.138.15
135.149.17.81
Looker SFTP notifications 
34.84.4.218
34.146.68.203
34.85.3.198
34.84.4.218
34.146.68.203
34.85.3.198
Canada
  • North Europe
  • Canada Central
  • West Europe
  • Canada East
Log Export 
4.209.242.155
4.174.211.111
4.209.242.155
4.174.211.111
Real Time Data Export 
130.107.208.253
130.107.10.82
130.107.208.253
130.107.10.82
Looker SFTP notifications 
34.152.60.210
35.203.46.255
35.234.253.103
35.203.16.100
34.152.60.210
35.203.46.255
35.234.253.103
35.203.16.100
Singapore
  • North Europe
  • Southeast Asia
  • West Europe
  • East Asia
Log Export 
4.209.242.155
57.158.137.134
4.209.242.155
57.158.137.134
Real Time Data Export 
20.247.146.89
57.158.190.211
20.247.146.89
57.158.190.211
Looker SFTP notifications 
34.87.134.202
34.143.132.206
34.143.210.116
35.185.184.54
34.87.134.202
34.143.132.206
34.143.210.116
35.185.184.54
India
  • North Europe
  • Central India
  • West Europe
  • South India
Log Export 
4.209.242.155
98.70.224.34
4.209.242.155
98.70.224.34
Real Time Data Export 
135.235.177.71
135.235.249.14
135.235.177.71
135.235.249.14
Looker SFTP notifications 
35.200.158.11
34.100.209.232
34.93.170.82
35.200.158.11
34.100.209.232
34.93.170.82
United Kingdom
  • North Europe
  • UK South
  • West Europe
  • UK West
Log Export 
4.209.242.155
131.145.43.57
4.209.242.155
131.145.43.57
Real Time Data Export 
74.177.240.23
85.210.75.139
74.177.240.23
85.210.75.139
Looker SFTP notifications 
34.147.209.63
35.197.212.7
34.142.53.66
34.147.209.63
35.197.212.7
34.142.53.66
GXP United States of America
  • East US
  • West US
Log Export 134.33.240.104
Real Time Data Export 
51.8.242.246
134.33.200.238
51.8.242.246
134.33.200.238
Looker SFTP notifications 
35.221.62.218
34.86.34.135
35.236.240.168
35.221.62.218
34.86.34.135
35.236.240.168
GXP Europe
  • North Europe
  • East US
  • West Europe
  • West US
Log Export 
134.33.240.104
52.158.122.175
134.33.240.104
52.158.122.175
Real Time Data Export 
52.158.126.222
20.13.193.184
52.158.126.222
20.13.193.184
Looker SFTP notifications 
34.90.52.191
35.204.216.7
35.204.118.28
34.90.52.191
35.204.216.7
35.204.118.28
Limitations​

For Log Export, Google Storage does not support inbound IP restriction.

Due to a limitation on Microsoft side for Log Export, you cannot set up inbound IP restriction when your Azure blob storage account and the Insights infrastructure is under the same region in Azure. Because of this, you cannot use the following regions for blob storage account based on the Insights service region:

  • Insights US: North Europe, East US
  • Insights Europe: North Europe, West Europe (For Community Licensing)
  • Insights UK: North Europe, UK South
  • Insights Canada: North Europe, Canada Central
  • Insights Singapore: North Europe, Southeast Asia
  • Insights India: North Europe, Central India
  • Insights Australia: North Europe, Australia East
  • Insights Japan: North Europe, Japan East
  • Insights GXP Europe: North Europe, East US
  • Insights GXP US: East US

For more information on this limitation, check the Restrictions for IP network rules page from the Microsoft Azure Blob Storage documentation.

Integration Service​

Outbound IP ranges​

Add the following outbound IP ranges to your allow list to use Integration Service and create connections, as described in the following table.

RegionOutbound IP rangesEnvironment
AustraliaProduction
CanadaProduction
EuropeProduction
JapanProduction
IndiaProduction
SingaporeProduction
United KingdomProduction
United StatesProduction
GxP United States (Delayed update organizations)Production
CommunityProduction

IP addresses marked with an asterisk () are designated for newly incorporated Azure regions. These IPs will supersede the existing regional IPs upon completion of the scheduled tenant migration process. For details, refer to the Integration Service release notes.

Orchestrator​

Domains​

Robots send traffic to these Test Cloud Orchestrator domains. We recommend that you allow these domains to ensure proper functioning of your automations, as described in the following table:

Robots send traffic to these Test Cloud Orchestrator domains. We recommend that you allow these domains to ensure proper functioning of your automations, as described in the following table:

Module or FunctionalityDomains to Allow
UiPath Orchestratorhttps://cloud.uipath.com
https://orch-cdn.uipath.com
https://account.uipath.com
Automation Cloud Robots - VMhttps://cloud.uipath.com
https://download.uipath.com
Storage*.blob.core.windows.net If using Amazon s3 buckets: *.s3.amazonaws.com
Package and library feeds (library, tenant processes, and others)https://pkgs.dev.azure.com
Azure SignalR*.service.signalr.net
Studio and Robot auto-update functionalityhttps://download.uipath.com
Traffic Manager (internal)*.trafficmanager.net

Outbound IP ranges​

We recommend allowing these outbound IP ranges, which send traffic from Orchestrator towards your resources. For details, refer to Orchestrator outbound IP ranges.

Community users​
RegionCIDROutbound IP ranges
Europe (European Union)
20.123.102.24/30
20.50.147.88/30
168.63.58.240/30
168.63.56.100/30
20.71.24.32/30
20.71.24.128/30
20.166.153.132/30
20.23.210.168/30
20.123.102.24/30
20.50.147.88/30
168.63.58.240/30
168.63.56.100/30
20.71.24.32/30
20.71.24.128/30
20.166.153.132/30
20.23.210.168/30

20.123.102.24
20.123.102.25
20.123.102.26
20.123.102.27
20.50.147.88
20.50.147.89
20.50.147.90
20.50.147.91
168.63.58.240
168.63.58.241
168.63.58.242
168.63.58.243
168.63.56.100
168.63.56.101
168.63.56.102
168.63.56.103
20.71.24.32
20.71.24.33
20.71.24.34
20.71.24.35
20.71.24.128
20.71.24.129
20.71.24.130
20.71.24.131
20.166.153.132
20.166.153.133
20.166.153.134
20.166.153.135
20.23.210.168
20.23.210.169
20.23.210.170
20.23.210.171
20.123.102.24
20.123.102.25
20.123.102.26
20.123.102.27
20.50.147.88
20.50.147.89
20.50.147.90
20.50.147.91
168.63.58.240
168.63.58.241
168.63.58.242
168.63.58.243
168.63.56.100
168.63.56.101
168.63.56.102
168.63.56.103
20.71.24.32
20.71.24.33
20.71.24.34
20.71.24.35
20.71.24.128
20.71.24.129
20.71.24.130
20.71.24.131
20.166.153.132
20.166.153.133
20.166.153.134
20.166.153.135
20.23.210.168
20.23.210.169
20.23.210.170
20.23.210.171
Enterprise users​
RegionCIDROutbound IP ranges
Australia
20.92.156.92/30
23.101.220.128/30
23.101.208.196/30
20.213.69.140/30
20.92.42.116/30
20.92.156.92/30
23.101.220.128/30
23.101.208.196/30
20.213.69.140/30
20.92.42.116/30

20.92.156.92
20.92.156.93
20.92.156.94
20.92.156.95
23.101.220.128
23.101.220.129
23.101.220.130
23.101.220.131
23.101.208.196
23.101.208.197
23.101.208.198
23.101.208.199
20.213.69.140
20.213.69.141
20.213.69.142
20.213.69.143
20.92.42.116
20.92.42.117
20.92.42.118
20.92.42.119
20.92.156.92
20.92.156.93
20.92.156.94
20.92.156.95
23.101.220.128
23.101.220.129
23.101.220.130
23.101.220.131
23.101.208.196
23.101.208.197
23.101.208.198
23.101.208.199
20.213.69.140
20.213.69.141
20.213.69.142
20.213.69.143
20.92.42.116
20.92.42.117
20.92.42.118
20.92.42.119
Canada
20.116.141.44/30
20.63.56.64/30
20.63.56.68/30
20.220.159.8/30
20.104.134.160/30
20.116.141.44/30
20.63.56.64/30
20.63.56.68/30
20.220.159.8/30
20.104.134.160/30

20.116.141.44
20.116.141.45
20.116.141.46
20.116.141.47
20.63.56.64
20.63.56.65
20.63.56.66
20.63.56.67
20.63.56.68
20.63.56.69
20.63.56.70
20.63.56.71
20.220.159.8
20.220.159.9
20.220.159.10
20.220.159.11
20.104.134.160
20.104.134.161
20.104.134.162
20.104.134.163
20.116.141.44
20.116.141.45
20.116.141.46
20.116.141.47
20.63.56.64
20.63.56.65
20.63.56.66
20.63.56.67
20.63.56.68
20.63.56.69
20.63.56.70
20.63.56.71
20.220.159.8
20.220.159.9
20.220.159.10
20.220.159.11
20.104.134.160
20.104.134.161
20.104.134.162
20.104.134.163
United States
20.124.53.40/30
20.121.182.72/30
20.121.104.124/30
40.114.108.32/30
40.114.108.220/30
20.232.224.12/30
20.66.65.144/30
20.124.53.40/30
20.121.182.72/30
20.121.104.124/30
40.114.108.32/30
40.114.108.220/30
20.232.224.12/30
20.66.65.144/30

20.124.53.40
20.124.53.41
20.124.53.42
20.124.53.43
20.121.182.72
20.121.182.73
20.121.182.74
20.121.182.75
20.121.104.124
20.121.104.125
20.121.104.126
20.121.104.127
40.114.108.32
40.114.108.33
40.114.108.34
40.114.108.35
40.114.108.220
40.114.108.221
40.114.108.222
40.114.108.223
20.232.224.12
20.232.224.13
20.232.224.14
20.232.224.15
20.66.65.144
20.66.65.145
20.66.65.146
20.66.65.147
20.124.53.40
20.124.53.41
20.124.53.42
20.124.53.43
20.121.182.72
20.121.182.73
20.121.182.74
20.121.182.75
20.121.104.124
20.121.104.125
20.121.104.126
20.121.104.127
40.114.108.32
40.114.108.33
40.114.108.34
40.114.108.35
40.114.108.220
40.114.108.221
40.114.108.222
40.114.108.223
20.232.224.12
20.232.224.13
20.232.224.14
20.232.224.15
20.66.65.144
20.66.65.145
20.66.65.146
20.66.65.147
Japan
20.210.80.72/30
52.253.104.184/30
52.253.105.76/30
20.78.114.120/30
104.215.9.124/30
20.210.80.72/30
52.253.104.184/30
52.253.105.76/30
20.78.114.120/30
104.215.9.124/30

20.210.80.72
20.210.80.73
20.210.80.74
20.210.80.75
52.253.104.184
52.253.104.185
52.253.104.186
52.253.104.187
52.253.105.76
52.253.105.77
52.253.105.78
52.253.105.79
20.78.114.120
20.78.114.121
20.78.114.122
20.78.114.123
104.215.9.124
104.215.9.125
104.215.9.126
104.215.9.127
20.210.80.72
20.210.80.73
20.210.80.74
20.210.80.75
52.253.104.184
52.253.104.185
52.253.104.186
52.253.104.187
52.253.105.76
52.253.105.77
52.253.105.78
52.253.105.79
20.78.114.120
20.78.114.121
20.78.114.122
20.78.114.123
104.215.9.124
104.215.9.125
104.215.9.126
104.215.9.127
Europe (European Union)
20.223.90.156/30
20.223.16.0/30
4.207.205.236/30
168.63.58.108/30
168.63.58.144/30
20.166.153.132/30
20.23.210.168/30
20.223.90.156/30
20.223.16.0/30
4.207.205.236/30
168.63.58.108/30
168.63.58.144/30
20.166.153.132/30
20.23.210.168/30

20.223.90.156
20.223.90.157
20.223.90.158
20.223.90.159
20.223.16.0
20.223.16.1
20.223.16.2
20.223.16.3
4.207.205.236
4.207.205.237
4.207.205.238
4.207.205.239
168.63.58.108
168.63.58.109
168.63.58.110
168.63.58.111
168.63.58.144
168.63.58.145
168.63.58.146
168.63.58.147
20.166.153.132
20.166.153.133
20.166.153.134
20.166.153.135
20.23.210.168
20.23.210.169
20.23.210.170
20.23.210.171
20.223.90.156
20.223.90.157
20.223.90.158
20.223.90.159
20.223.16.0
20.223.16.1
20.223.16.2
20.223.16.3
4.207.205.236
4.207.205.237
4.207.205.238
4.207.205.239
168.63.58.108
168.63.58.109
168.63.58.110
168.63.58.111
168.63.58.144
168.63.58.145
168.63.58.146
168.63.58.147
20.166.153.132
20.166.153.133
20.166.153.134
20.166.153.135
20.23.210.168
20.23.210.169
20.23.210.170
20.23.210.171
Singapore
104.43.98.180/30
52.230.32.132/30
52.230.32.188/30
20.198.150.140/30
104.43.98.180/30
52.230.32.132/30
52.230.32.188/30
20.198.150.140/30

104.43.98.180
104.43.98.181
104.43.98.182
104.43.98.183
52.230.32.132
52.230.32.133
52.230.32.134
52.230.32.135
52.230.32.188
52.230.32.189
52.230.32.190
52.230.32.191
20.198.150.140
20.198.150.141
20.198.150.142
20.198.150.143
104.43.98.180
104.43.98.181
104.43.98.182
104.43.98.183
52.230.32.132
52.230.32.133
52.230.32.134
52.230.32.135
52.230.32.188
52.230.32.189
52.230.32.190
52.230.32.191
20.198.150.140
20.198.150.141
20.198.150.142
20.198.150.143
United Kingdom
20.90.174.164/30
51.140.5.96/30
51.140.6.156/30
20.90.169.148/30
51.142.146.56/30
20.90.174.164/30
51.140.5.96/30
51.140.6.156/30
20.90.169.148/30
51.142.146.56/30

20.90.174.164
20.90.174.165
20.90.174.166
20.90.174.167
51.140.5.96
51.140.5.97
51.140.5.98
51.140.5.99
51.140.6.156
51.140.6.157
51.140.6.158
51.140.6.159
20.90.169.148
20.90.169.149
20.90.169.150
20.90.169.151
51.142.146.56
51.142.146.57
51.142.146.58
51.142.146.59
20.90.174.164
20.90.174.165
20.90.174.166
20.90.174.167
51.140.5.96
51.140.5.97
51.140.5.98
51.140.5.99
51.140.6.156
51.140.6.157
51.140.6.158
51.140.6.159
20.90.169.148
20.90.169.149
20.90.169.150
20.90.169.151
51.142.146.56
51.142.146.57
51.142.146.58
51.142.146.59
India
4.224.102.80/30
40.80.89.112/30
40.80.89.132/30
20.219.182.96/30
52.140.57.140/30
4.224.102.80/30
40.80.89.112/30
40.80.89.132/30
20.219.182.96/30
52.140.57.140/30

4.224.102.80
4.224.102.81
4.224.102.82
4.224.102.83
40.80.89.112
40.80.89.113
40.80.89.114
40.80.89.115
40.80.89.132
40.80.89.133
40.80.89.134
40.80.89.135
20.219.182.96
20.219.182.97
20.219.182.98
20.219.182.99
52.140.57.140
52.140.57.141
52.140.57.142
52.140.57.143
4.224.102.80
4.224.102.81
4.224.102.82
4.224.102.83
40.80.89.112
40.80.89.113
40.80.89.114
40.80.89.115
40.80.89.132
40.80.89.133
40.80.89.134
40.80.89.135
20.219.182.96
20.219.182.97
20.219.182.98
20.219.182.99
52.140.57.140
52.140.57.141
52.140.57.142
52.140.57.143
Delayed update organizations​
RegionCIDROutbound IP ranges
Europe (European Union)
168.63.56.128/30
168.63.56.212/30
20.166.153.132/30
20.23.210.168/30
4.207.205.236/30
168.63.56.128/30
168.63.56.212/30
20.166.153.132/30
20.23.210.168/30
4.207.205.236/30

168.63.56.128
168.63.56.129
168.63.56.130
168.63.56.131
168.63.56.212
168.63.56.213
168.63.56.214
168.63.56.215
20.166.153.132
20.166.153.133
20.166.153.134
20.166.153.135
20.23.210.168
20.23.210.169
20.23.210.170
20.23.210.171
4.207.205.236
4.207.205.237
4.207.205.238
4.207.205.239
168.63.56.128
168.63.56.129
168.63.56.130
168.63.56.131
168.63.56.212
168.63.56.213
168.63.56.214
168.63.56.215
20.166.153.132
20.166.153.133
20.166.153.134
20.166.153.135
20.23.210.168
20.23.210.169
20.23.210.170
20.23.210.171
4.207.205.236
4.207.205.237
4.207.205.238
4.207.205.239
United States
40.114.109.36/30
40.114.109.64/30
20.232.224.12/30
20.66.65.144/30
20.121.104.124/30
40.114.109.36/30
40.114.109.64/30
20.232.224.12/30
20.66.65.144/30
20.121.104.124/30

40.114.109.36
40.114.109.37
40.114.109.38
40.114.109.39
40.114.109.64
40.114.109.65
40.114.109.66
40.114.109.67
20.232.224.12
20.232.224.13
20.232.224.14
20.232.224.15
20.66.65.144
20.66.65.145
20.66.65.146
20.66.65.147
20.121.104.124
20.121.104.125
20.121.104.126
20.121.104.127
40.114.109.36
40.114.109.37
40.114.109.38
40.114.109.39
40.114.109.64
40.114.109.65
40.114.109.66
40.114.109.67
20.232.224.12
20.232.224.13
20.232.224.14
20.232.224.15
20.66.65.144
20.66.65.145
20.66.65.146
20.66.65.147
20.121.104.124
20.121.104.125
20.121.104.126
20.121.104.127

MCP Servers​

The remote MCP Servers service uses the outgoing IP ranges listed below for all external communications. The following table shows the available outbound IP ranges for each region.

RegionOutbound IP ranges
Europe
94.245.89.4/30
94.245.93.8/30
94.245.89.4/30
94.245.93.8/30
Europe (Secondary)
20.67.88.64/30
20.67.88.112/30
20.67.88.64/30
20.67.88.112/30
Europe - Community
94.245.93.132/30
94.245.93.148/30
94.245.93.132/30
94.245.93.148/30
Europe - Community (Secondary)
20.67.88.116/30
20.67.88.132/30
20.67.88.116/30
20.67.88.132/30
US
104.211.63.160/30
104.211.58.236/30
104.211.63.160/30
104.211.58.236/30
US (Secondary)
13.66.167.4/30
13.66.163.204/30
13.66.167.4/30
13.66.163.204/30
Canada
20.151.112.252/30
20.151.113.120/30
20.151.112.252/30
20.151.113.120/30
Canada (Secondary)
40.86.219.188/30
40.86.224.148/30
40.86.219.188/30
40.86.224.148/30
Singapore
104.215.184.68/30
104.215.185.96/30
104.215.184.68/30
104.215.185.96/30
Japan
20.89.104.152/30
20.89.104.200/30
20.89.104.152/30
20.89.104.200/30
Japan (Secondary)
40.74.64.240/30
40.74.65.80/30
40.74.64.240/30
40.74.65.80/30
Australia
13.75.193.84/30
13.75.193.112/30
13.75.193.84/30
13.75.193.112/30
Australia (Secondary)
13.77.46.56/30
13.77.40.228/30
13.77.46.56/30
13.77.40.228/30
India
40.80.89.64/30
40.80.89.136/30
40.80.89.64/30
40.80.89.136/30
India (Secondary)
104.211.218.152/30
104.211.222.120/30
104.211.218.152/30
104.211.222.120/30
UK
51.104.16.124/30
51.104.16.168/30
51.104.16.124/30
51.104.16.168/30
UK (Secondary)
51.140.205.20/30
51.140.205.248/30
51.140.205.20/30
51.140.205.248/30
GXP Europe
94.245.93.164/30
94.245.93.196/30
94.245.93.164/30
94.245.93.196/30
GXP Europe (Secondary)
20.67.88.148/30
20.67.88.164/30
20.67.88.148/30
20.67.88.164/30
GXP US
104.211.56.184/30
40.114.71.160/30
104.211.56.184/30
40.114.71.160/30
GXP US (Secondary)
13.66.166.60/30
13.66.160.164/30
13.66.166.60/30
13.66.160.164/30

Process Mining​

Domains​

The following table lists the domains used by Process Mining:

Module or ScenarioDomains to Allow
Identity Serverhttps://cloud.uipath.com
Static assetshttps://fonts.googleapis.com
https://fonts.gstatic.com
https://content.usage.uipath.com
https://s.gravatar.com
https://i1.wp.com
Azure SignalR*.service.signalr.net
Telemetryhttps://*.in.applicationinsights.azure.com
Upload files*.blob.core.windows.net

Solutions​

Domains​

The following table lists the domains used by Solutions:

ScenarioDomains to Allow
Navigate to the Solutions Management pagehttps://cloud.uipath.com
https://fonts.googleapis.com
https://fonts.gstatic.com
https://dc.services.visualstudio.com
api.smartling.com
use.typekit.net
p.typekit.net
s.gravatar.com
i2.wp.com
https://platform-cdn.uipath.com
https://sol-cdn.uipath.com
https://solutions.uipath.com
Storage*.blob.core.windows.net
Azure SignalR*.service.signalr.net

Studio Web​

Domains​

The following table lists the domains used by Studio Web:

Module or FunctionalityDomains to Allow
Azure SignalRwss://*.service.signalr.net
https://*.service.signalr.net
wss://*.trafficmanager.net
UiPath productshttps://*.uipath.com
UiPath products (in-app feedback)https://studio-feedback.azure-api.net
UiPath products (static assets)https://platform-cdn.uipath.com
https://content.usage.uipath.com
https://fonts.gstatic.com
https://d2c7xlmseob604.cloudfront.net
https://fonts.googleapis.com/
https://*.typekit.net
https://fonts.gstatic.com
https://s.gravatar.com
https://secure.gravatar.com
https://*.wp.com
https://*.googleusercontent.com
https://i.ytimg.com
UiPath products (telemetry)https://data.usage.uipath.com
Third-party services (clickable guides)https://*.pendo.io
Third-party services (storage)https://*.blob.core.windows.net
https://*.amazonaws.com
Third-party services (telemetry)https://dc.services.visualstudio.com
Third-party services (translations helper)https://api.smartling.com

Task Mining​

Domains​

If your company uses proxies, the URLs, described in the following table, need to be added to the Firewall Exceptions so the Task Mining desktop components connect to our web servers.

Note:

The Task Mining Desktop application uses web sockets for real-time communication with the server (telemetry and governance). For the URLs and IPs to be allowed, the transparent proxy is expected to have the HTTPS and WSS protocols enabled.

Component URL Port
Admin Portal https://cloud.uipath.com 443
Web Portal *.blob.core.windows.net 443
Pendo https://content.usage.uipath.com 443
Azure App Insights

dc.services.visualstudio.com

dc.applicationinsights.azure.com

dc.applicationinsights.microsoft.com

dc.services.visualstudio.com

*.in.applicationinsights.azure.com

live.applicationinsights.azure.com

rt.applicationinsights.microsoft.com

rt.services.visualstudio.com

{region}.livediagnostics.monitor.azure.com

 443
Azure Signalr

  • service.signalr.net

    *.service.signalr.net

 443
Avatars i2.wp.com/cdn.auth0.com/avatars 443

Test Manager​

This section lists the domains used by Test Manager and the outbound IP ranges that you should consider allowing if you want to use various Test Manager capabilities.

Domains​

The following table lists the domains used by Test Manager that we recommend allowing, based on the functionality you plan to use:

Module or functionalityDomains to allow
UiPath Test Managerhttps://cloud.uipath.com
Azure SignalR*.service.signalr.net

SAP Heatmap and CIA RFC Outbound IPs​

Allow the following outbound IP ranges to establish communication between UiPath Test Manager and your SAP system via an RFC connection. The following table shows the available outbound IP ranges for each region.

RegionOutbound IP ranges
Australia
Canada
Europe (European Union)
India
GXP United States
Japan
Singapore
United Kingdom
United States

SAP Heatmap and CIA Web Service Outbound IPs​

Allow the following static outbound IP ranges to enable the communication between UiPath Test Manager and your SAP system, via a web service connection.

Allow these outbound IP ranges through your firewall:

RegionsOutbound IP ranges
Australia
20.213.69.140/30
20.92.42.116/30
20.213.69.140/30
20.92.42.116/30
Canada
20.220.159.8/30
20.104.134.160/30
20.220.159.8/30
20.104.134.160/30
Community
20.166.153.132/30
20.23.210.168/30
20.166.153.132/30
20.23.210.168/30
European Union
20.166.153.132/30
20.23.210.168/30
20.166.153.132/30
20.23.210.168/30
European Union (delayed)
20.166.153.132/30
20.23.210.168/30
20.166.153.132/30
20.23.210.168/30
India
20.219.182.96/30
52.140.57.140/30
20.219.182.96/30
52.140.57.140/30
Japan
20.78.114.120/30
104.215.9.124/30
20.78.114.120/30
104.215.9.124/30
Singapore
20.198.150.140/30
52.140.57.140/30
20.198.150.140/30
52.140.57.140/30
United Kingdom
20.90.169.148/30
51.142.146.56/30
20.90.169.148/30
51.142.146.56/30
United States
20.232.224.12/30
20.66.65.144/30
20.232.224.12/30
20.66.65.144/30
United States (delayed)
20.232.224.12/30
20.66.65.144/30
20.232.224.12/30
20.66.65.144/30

Outbound IP ranges for connectors​

If you enhance your system's security with a firewall, consider allowing only Test Manager outbound IP ranges for using out-of-the-box connectors.

The following outbound IP ranges apply to all supported regions, including: Australia, Canada, European Union, India, Japan, Singapore, United Kingdom, United States, and GxP United States (delayed).

Allow these outbound IP ranges through your firewall:

RegionsOutbound IP ranges
Australia, Canada, European Union, India, Japan, Singapore, United Kingdom, United States, and GxP United States (delayed)
20.92.42.116/30
20.213.69.140/30
20.220.159.8/30
20.104.134.160/30
20.23.210.168/30
20.166.153.132/30
20.219.182.96/30
52.140.57.140/30
20.66.65.144/30
20.232.224.12/30
104.215.9.124/30
20.78.114.120/30
20.198.150.140/30
51.142.146.56/30
20.90.169.148/30
20.92.42.116/30
20.213.69.140/30
20.220.159.8/30
20.104.134.160/30
20.23.210.168/30
20.166.153.132/30
20.219.182.96/30
52.140.57.140/30
20.66.65.144/30
20.232.224.12/30
104.215.9.124/30
20.78.114.120/30
20.198.150.140/30
51.142.146.56/30
20.90.169.148/30

Was this page helpful?

Connect

Need help? Support

Want to learn? UiPath Academy

Have questions? UiPath Forum

Stay updated